Skip to main content

How to Make Faster Windows XP installation Process

Normally, to install Windows XP takes about 40 minutes
There is a trick to get Windows XP installation process much faster, only takes about 20 to 25 minutes.


Here's the trick :

• Boot the computer using the XP CD installer and follow the initial setup steps as usual.
• At the formatting step , select Quick format (NTFS or FAT32)
• The computer will restart and will start the installation process on  GUI mode (Graphical User Interface), from here we start the trick.




• After the display appears as above, press Shift + F10, (to enter to the Command prompt)
• Type taskmgr to enter to the Task Manager



• At the task manager page, click on the  Process Tab
• Right-click on setup.exe, and click Set Priority -> Select High


• Task Manager Warning will appear, click Yes


Good luck  .. 


See Also :

• How To Add / Insert Watermark In Microsoft Word 2007 
• Html code for variations of running text (marquee) 
• How To Enable Default Games in Windows 7 


Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more