Skip to main content

How To Know Android Local IP Address

While connecting to the hotspot or wifi,  android device ( smartphone,  tablet, etc) will get the IP (internet protocol) address, which is given by the DHCP server in it's hotspot / wifi.

To find a local IP address given (obtained by the android) while it is connected to a wifi/ hotspot, following the steps below.

• Go to the Settings menu

Example picture - using  Samsung Galaxy Tab, for other android devices in principle is the same, just different in appearance only.





• Then go to the Wi-fi settings




• Select / click on the connected wifi



Then It will display the local  android IP address




See Also :
• How To Terminate or exit Application Samsung Galaxy Tab 
• Toshiba Satellite M55 S3262 Driver for Windows 
• How To know The Version of Blackberry OS
• How To Hide / Disable All Programs From The Start Menu In Windows 7 
• How to Show Recent Documents / Recent Items Menu In Windows 7 
• How to Change Measurement Unit, From Inch to Others, to mm or cm in MS Office 2007 

Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more