How To Build LAN / Network Cable by Myself

We can create or build standard network cable / LAN (Local Area Network), that use Rj-45 Connector.
It's not difficult to build.

The tool what we need is the Crimping Tool. We can buy it from computer network accessories store. Now the price is various from expensive to very cheap price.

The Cable can be used cat5 or cat6 UTP cable. And using the standard Rj-45 Connector. Those can we get from the computer network and accessories store.

Take out the outside of UTP Cable using cutter on crimping tool (or you can use a scissor)

Sort the cables (8 cables) by color from left to right
1. White-green
2. Green
3. White-orange
4. Blue
5. White-blue
6. orange
7. White-brown
8. Brown

Cut the cables using cutter of crimping tool (to make a flat and parallel and easy for inserting cables to the Rj-45 connector)

Insert the cables to the RJ-45 connector ,( make sure the cables arrangement/color not change)

Make sure all the cables touch the edge of the Rj-45 conector

Crimp the Connector

Do the same steps for the other side of LAN Cable. Except if you want to make cross-over cable (see the Cross-over UTP Cable configuration )

For detail you can see the video, how to build the LAN cable using standard Rj-45 connector.

Youtube link : https://youtu.be/Cs7l8F_8KXc

See also : Cross over UTP Cable Configuration

Other Posts :
• How To Find Location of Share Folder in Windows
• How To Check ATX Power supply with Easy
• How To Convert Outlook Notes to become Text Files

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is: when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.

How to deny access to a drive in Windows 10

How to disable access to drives in Windows. One of ways to make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are the steps: 1. Press Windows + R (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.

Computer & smartphone Tips Trick

Search This Blog