Skip to main content

How To Clear/ Remove Saved Password in Windows

If you have saved / stored password in Windows, for example password for network file sharing or printer sharing, and now you want to remove it because  you don't need it again, or if the resource password is already changed so that you need to change the password to still be able to connect to that resource.

In shared folder, if the password is already changed but in your windows still have the old password, of course you will have an error message and cannot connect to the resources, so you need to edit  the password.


Below are the steps to remove/clear or edit stored/saved  password in Windows 7
( for others Windows are not too different, same go to  Windows credentials)

Go to Control Panel, User Accounts
( Click Start --> Control Panel --> User Accounts )


Click Manage your credentials


See on Windows Credentials, Click Modified
Now you can edit or remove password as you need.






Other Posts :
• How To Make Connection between Two Computers 
• Cross-over UTP Cable configuration 
• How To "Build" The LAN Cable 
• How To Find Location of Share Folder in Windows 
• How To Check ATX Power supply with Easy

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.