Skip to main content

Setting VPN Windows 8

To set or configure VPN client in Windows 8 :
• From Desktop screen,  go to Taskbar, right-click on the Network icon, then click Open Network and Sharing Center.
The Network and Sharing Center window will appear



• Choose Set up a new connection network



• Choose Connect to a workplace




• Choose No, create a new connection
(You can choose Yes, but for me better to choose Yes)



• Choose Use my Internet connection (VPN)



• Write the IP Address and give the name of your VPN connection, then click Create




Now you are ready to connect using  VPN
• Before connect to VPN, you have to connect to the Internet first
• After internet connected, go to taskbar, click the network icon, it will display the network window.



• You can see the VPN connection that already configured
(My VPN Connection 2), then click on it



• Enter the username and password for your VPN



• If already connected the status in the VPN connection will be connected


Now you are already in the remote Network.
Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more