Skip to main content

Download Picture From iPhone Without iTunes

Usually to access data on an iPhone (and others iOS) you need iTunes installed on the computer. But you can also use other ways (not use iTunes) to access or download data from iPhone/iPad.

There are many Apps can be used for accessing the iPhone/iPad data, one is Wifi Photo Transfer special app for downloading photo/picture from iPhone/iPad to other devices, to computer, Android device, etc those have  internet browser and wifi connection.

Connect iPhone/iPad and the computer or other devices to the same wifi (same SSID/name)
Install Wifi Photo Transfer App on the iPhone/iPad
Access the iPhone/iPad using browser from other devices (computer, Android, iOS, etc )
Browse and download the Pictures.

Detail Steps :

 • Install Wifi Photo Transfer
In the iPhone/iPad that you want to access, open App Store, then search for App using keyword Wifi Photo Transfer.
Choose the App like this figure :


Then install the App.

• After already installed, run/open the App. The address to be accessed will be appeared, for example in my iPhone (figure below) the IP address is 192.168.2.108:15555



• Go to Browser in other devices (computer, android, etc that connect to the same wifi as iPhone connected)
then in the address bar of the browser type/write the IP address and port, according to the instruction on the App above, in my example is http://192.168.2.108:15555


• You can browse the pictures and download them
Also you can download  multiple pictures at once in zip format.


Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more