How to Backup Mikrotik Configuration

How to Backup Mikrotik Setting

It is very important to get the backup configuration for your Mikrotik router board. The backup file configuration will be needed when your mikrotik router board has error on it's configuration, or want to clone the configuration to other Mikrotik router board.

To Backup Mikrotik router board configuration :

1. Open Winbox.

2. Login to your Mikrotik (use admin/full group member).

3. Go to Files menu.

4. To start backup, click Backup.

You will see the new backup file

The newly generated backup file is ready for use (when you need to restore, just select the file and click restore).

It is recommended to save the backup file configuration to the other location (your drive, flashdisk,etc).

To copy to the other location :
1. Select the backup file.
2. Click the copy icon.

3. Open the Windows explorer/ file explorer.
4. Browse/go to drive or location you want.
5. Paste the File

Next.. How to Restore the Mikrotik router board configuration from backup file.

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is: when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.

How to deny access to a drive in Windows 10

How to disable access to drives in Windows. One of ways to make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are the steps: 1. Press Windows + R (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.

Computer & smartphone Tips Trick

Search This Blog