Saturday, March 21, 2015

How to Enable Telnet in Windows 8

When you use telnet command in Windows and then get the message telnet is not recognized as an internal or external command, it means that the telnet client has not been activated in the windows features, because at default setting in Windows  this command is disabled.



To enabling Telnet client in Windows 8 , Windows 8.1 :

• Go to Start Screen
(press Windows button at the keyboard to toogle between Desktop and Start Screen)
• From the Start Screen, type/write:  program and features
• Choose/click the Program and Features from the result list


Tuesday, March 17, 2015

Lost IP Address IBM Storwize V7000

If you forgot the management IP address or you want to know the summary settings for SAN Storage IBM Storwize V7000, below is the way :

• Take an USB flash disk/flash drive, better the empty one with standard Fat 32 format.

• Put/connect the USB Flash drive to the port of the canister (when storwize in operation/during operation), the system will automatically run the Service command, and generate the result saved in the USB drive.

Connect the USB drive for about 1 or 2 minutes (until USB LED stop flashing if it has the LED indicator)

Rear of IBM Storwize V7000, connect the USB Flash disk to one of USB ports

Friday, March 6, 2015

How to set Automatic Startup VM in VmWare ESX

If you want your VM computer auto start when the host computer is powered on, in VMware vSphere  ESX, ESX4 or ESX 5 using VMware vSphere client.

1.  Open VMware vSphere client.
2.  Go to Configuration tab.
3. Choose Virtual Machine Startup/Shutdown menu.
4. Click Properties.



5. Give a tick on the Allow virtual machines to start and stop automatically with the system.
6. Choose the virtual machine you want to become automatically start, click Move up and put on the automatic area.