Skip to main content

Lost IP Address IBM Storwize V7000

If you forgot the management IP address or you want to know the summary settings for SAN Storage IBM Storwize V7000, below is the way :

• Take an USB flash disk/flash drive, better the empty one with standard Fat 32 format.

• Put/connect the USB Flash drive to the port of the canister (when storwize in operation/during operation), the system will automatically run the Service command, and generate the result saved in the USB drive.

Connect the USB drive for about 1 or 2 minutes (until USB LED stop flashing if it has the LED indicator)

Rear of IBM Storwize V7000, connect the USB Flash disk to one of USB ports


Real view, connecting USB Flash disk to USB port  IBM Storwize V7000

• Remove the flash drive from the port of IBM canister port.
• Then connect it to the computer as usual when you will work using USB flashdisk.
• Use file/windows explorer then you will see the new file named satask_result.html
• Open it (double click it)
• You will see the information, you will see the IP addresses, etc
for example in my figure :


Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more