How to pair Xiaomi Yi Remote Bluetooth

Pairing is needed before you can use the bluetooth remote shutter for Xiaomi Yi Sport Camera.

Below are the steps pairing Xiaomi Yi bluetooth remote :
1. Turn on the Xiaomi Yi, wait until the LED indicator light stop flashing.
2. Then turn on wifi by pressing the wifi button which is located beside the Xiaomi Yi camera , wait until the wifi indicator light flashes (blue LED flashes)
3. Press the wifi button twice quickly, and then press the button on the remote device (can be any button, shutter button or selection videos / photos button), wait until the indicator light on the bluetooth turn to blue (was red)
4. Try to press the button on the bluetooth remote, if the indicator on the remote already blue means the pairing is successful (also you can here beep sound on the camera when you push the buttons on the remote), the remote shutter is ready for use.

For the purpose of using this bluetooth remote, the wifi does not need to be ON, wifi is required when pairing only.
Turn off wifi if not use for smartphone or computer connection,

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is: when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.

How to deny access to a drive in Windows 10

How to disable access to drives in Windows. One of ways to make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are the steps: 1. Press Windows + R (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.

Computer & smartphone Tips Trick

Search This Blog