Skip to main content

How to capture audio from video

Capture audio from youtube.
Capture music from video.


To capture audio, music or voice from a video, online or offline video (from Internet or from hard/optical drive), you can do by using the audio editing software, in this example I use Audacity.

Audacity is an audio editing tool/software, easy to use and good result. You can download at http://www.audacityteam.org/

Because the aim is capturing audio from the video, it is better to disable the microphone of the computer/laptop to avoid recording voice around you.

To disable microphone :
• Right click speaker icon  at the tray icon.
• Click Recording devices.



• Right click at Microphone then choose Disable.





To start capturing audio from Video :

• Run the Audacity.
• Play/run the Video that you want to capture it's audio.
• Click the Record button to start capturing.


• If error or cannot start recording/capturing, try to switch the Audio-Host from MME to Windows WASAPI.


• To stop capturing by click the stop button.

• To save audio to general audio file, click File menu then choose Export Audio or using shortcut Ctrl+Shift+E, then choose the extension you want. For MP3 file you need to download the dll (lame_enc.dll). just follow the wizard. 


This method is not only for capturing audio from video, also capturing audio from all sources are processing in the sound card, audio game, radio online, auxiliary input, etc.

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.