How to know USB Current and Voltage

You can get the answer for your question about USB Voltage and current with this small tool, for example why charging process in the USB devices, smartphone, power bank, etc, will take a long time or short time, You can know voltage of the USB port of your computer/laptop, USB charger and know the current flow from USB port to USB devices.

The name of tool is USB tester, it can measure Voltage and Current of USB port,

To use this tool is very easy,

Plug the input port of this tool to the USB port of the computer/laptop or USB charger.
The output of this tool to be connected to the USB peripheral, Handphone, smarthone, flash drive, external hard drive, etc.

For easy to understand you can see the figures below:

In this example I put the USB tester between USB charger and my smartphone.
Voltage of this charger is read 5.03 V (with load ).

USB tester displaying the Voltage of USB charger

For the model of this USB tester, wait for several second, to toggle/change display from Volt (voltage) to Ampere (current), and from Ampere to Volt.
The electric current flow from charger to my smartphone, the value is 1.05 A

USB tester displaying the Current in Ampere of USB charger

I try to move and plug the USB tester to my Laptop.

The value is 4.86 V (with load/smartphone)

USB tester displaying Voltage of Laptop USB port

The current flow from my laptop USB to the smartphone is 0.46 A

USB tester displaying the Current in Ampere of laptop USB port to the smartphone

I try to connect to my Flash drive, the current is 0.04A

You can try to your USB devices, The price of this small USB tester is very cheap, you can buy from online store or at your local computer accessories store.

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is: when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.

How to deny access to a drive in Windows 10

How to disable access to drives in Windows. One of ways to make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are the steps: 1. Press Windows + R (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.

Computer & smartphone Tips Trick

Search This Blog