Skip to main content

Remote Desktop Setting in Windows Server 2016

How to set Remote Desktop in Windows Server 2016.

Same as other Windows to enable Remote desktop in Windows Server 2016:

1. Open File Explorer
2. Right-click This PC
3. Choose Properties.

4. Choose Remote settings



5, Choose Allow remote connections to this computer. There will be the alert : Remote Desktop Firewall exception will be enable, click OK.
Also in this window you can manage the user for remote desktop. Leave it if you don't need. (the administrator account will have the access without setting this option)


5. Click Apply, click OK.
The Remote Desktop access is ready.



Now go to client computer that will be used for accessing the remote computer/server.
In the example I use Windows 10.
2.1. Press Windows+R to open RUN command. Type mstsc then click OK or hit Enter.


2.2.Write the ip address of the remote computer/server.
in the example my ip server is 192.168.94.129, to start connecting, click Connect button.


2.3. You will be asked for username and password. click OK if ready.


2.4. Now you can see the desktop of remote computer/Windows server 2016.

Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more