Skip to main content

How to Create Safely Remove Hardware Shortcut on Desktop


If you work with external USB Storage media such as USB flashdisk, memory card, external hard drive, or any other external USB drive, you should always do for Safely Remove Hardware before opening or remove that external media, to avoid your data from error.

In order to make easily perform Safely Remove Hardware, you can create it's shortcut on the desktop screen.
The steps to create a shortcut :

• Right click on the desktop => click New => Click Shortcut



• Copy and Paste the following red code to the column Type the location of the item:
rundll32.exe shell32.dll,Control_RunDLL hotplug.dll   
• Click Next



• Give the shortcut a name,  up to you, for example my shortcut name is : Safely Remove Hardware

• Click Finish



Tags : Creating eject usb flashdisk shortcut, code for ejecting or remove USB safely remove Hardware

See Also :
Labels:

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

How to Record Audio Directly to USB Flashdisk on Ashley Remix-802 Mixer

The Ashley Remix-802 mixer is an audio mixer that features direct recording to USB. However, the recording process might not be immediately intuitive since there isn't a clear "record" button. Here are the steps to record audio directly to USB on the Ashley Remix-802 mixer: Recording Steps:  1. Format the Flash Drive: Format your flash drive with the FAT32 file system using a laptop or computer. 2. Add an MP3 File: Insert at least one MP3 file into the flash drive. This is necessary for the mixer to read the flash drive and enable the recording process. 3. Plug in the Flash Drive: Plug the flash drive into the USB port on the Ashley Remix-802 mixer. If the flash drive is recognized, the mixer will start playing the MP3 file, and the display will show that music is playing. 4. Start Recording: Press and hold the Play/Pause button for a few seconds until the display shows "rec." This indicates that the recording process has started. 5. Stop Recording: To stop the ...
Post a Comment
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more