Error #2046 in Browser

Error #2046 appears when I open a page that contains flash component. I try to reinstall the Adobe Flash but the problem still occur. I need the flash to access my HP SAN storage Eva 6000 using browser.

The temporary way to solve the problem is by changing the date of my computer to 5 May.

Yes it is work now, while waiting for final solution. No problem for me to adjust the date, it is easy.

How to know the wifi channel already used

When you will install wi-fi (access point) device, especially if the wifi device more than one, two or three, then you should pay attention to the wifi channel, because if the channel setting of each device is not correct, the  interference may be happen that may cause the connection to be slow or even dropped.

In general, default settings of wifi device  for the channel is set to automatically, when there are existing wifi signal, the new wifi device  will seek and occupy unused channel.

But just to be safe if you are confident in your area has wifi signal and you will install the new one, the channel should be set up manually. to avoid interference between the devices.
Channel menu on wifi device generally will be found in Wireless section, refer to your device  manual instruction.

The easy way to know wi-fi channel already used in the area, I use Wifi Analyzer, the App for Android. Easy to use and has good measuring result.
Take your Android device, go to Play Store,  search using keyword:  Wifi Analizer , choose the Wifi Analizer from farproc with the logo:

BIOS IS NOT UEFI! Solve the problem

In my Toshiba laptop, when I try to boot using external boot I get the error message:
BIOS IS NOT UEFI!

The problem solved after I change  Boot mode  in System Configuration menu in BIOS setting.

Restart the Toshiba laptop and go to the BIOS menu, (press F2 key many times during computer up)
Make Disable the Secure Boot

Detect Earthquakes using Smartphone

The newer smartphone can work as basic seismometers. Seismometer is a device used to determine changes in the ground surface vibration, which is usually associated with the earthquake.

If you have smartphone or computer tablet, uses Android or iPhone/iPad and you want to have  an application to detect an earthquake, just install the application named Seismograph.

For tablet computer and Android smartphone :
• Open Play Store
• Search the App using keyword: Seismograph

com.hp.ilo2.remcons.remcons.class, Solve the Problem

Error ClassNotFoundException, com.hp.ilo2.remcons.remcons.class

When you got the problem, it say ClassNotFoundException, com.hp.ilo2.remcons.remcons.class, while accessing remote console of HP server that still use the Integrated Lights-Out 2 (ILO2). Remote console uses the option:  Access the system KVM from a Java applet-based console requiring the availability of a JVM.
The problem as figure below:

Enabling ESXi Shell Direct Console ESXi 5

How to make enable direct console or SSH connect in ESXi 5 and 6.

Different with VMware ESX/i 4.1 and older,  In  the VMware vSphere ESXi  5.0 and newer ( 5.1, 5.5, and ESXi 6) you can't access the ESXi shell or remote using SSH because by default the settings are disable.

To make enable accessing ESXi Shell by direct or remote using SSH :
1. Go directly to the host
2. Press F2 Key (Customize System/View Logs)
3. Login using Administrator/root account.

How to Enable Telnet in Windows 8

When you use telnet command in Windows and then get the message telnet is not recognized as an internal or external command, it means that the telnet client has not been activated in the windows features, because at default setting in Windows  this command is disabled.

To enabling Telnet client in Windows 8 , Windows 8.1 :

• Go to Start Screen
(press Windows button at the keyboard to toogle between Desktop and Start Screen)
• From the Start Screen, type/write:  program and features
• Choose/click the Program and Features from the result list

Lost IP Address IBM Storwize V7000

If you forgot the management IP address or you want to know the summary settings for SAN Storage IBM Storwize V7000, below is the way :

• Take an USB flash disk/flash drive, better the empty one with standard Fat 32 format.

• Put/connect the USB Flash drive to the port of the canister (when storwize in operation/during operation), the system will automatically run the Service command, and generate the result saved in the USB drive.

Connect the USB drive for about 1 or 2 minutes (until USB LED stop flashing if it has the LED indicator)

Rear of IBM Storwize V7000, connect the USB Flash disk to one of USB ports

How to set Automatic Startup VM in VmWare ESX

If you want your VM computer auto start when the host computer is powered on, in VMware vSphere  ESX, ESX4 or ESX 5 using VMware vSphere client.

1.  Open VMware vSphere client.
2.  Go to Configuration tab.
3. Choose Virtual Machine Startup/Shutdown menu.
4. Click Properties.

5. Give a tick on the Allow virtual machines to start and stop automatically with the system.
6. Choose the virtual machine you want to become automatically start, click Move up and put on the automatic area.

Go to Bios in VMware Workstation 10

In the VMware Workstation 10 , if you want your  VM Computer to go to BIOS setting or you want to choose boot order, etc,  it will be difficult if using general hotkey such as F2 or Escape, because the process is too fast.

The way to enter to the BIOS in VM computer in VMware Workstation 10 is using the menu provided in Power menu:

1. Select the VM computer you want to set
2. Go to VM menu
3. Choose Power
4. Choose Power On to BIOS

How To Enable Pop up window in Safari

Default setting for pop-up blocker in Safari Browser is enable, it means  pop-up window is disable or blocked.
Some sites or web Applications need the pop-up window enable.

 

To enable pop-up windows in Safari browser :
Go to Preference menu

How to Backup Configuration Dell Sonicwall NSA 6600

Before you modify or change the setting for your firewall Dell Sonicwall NSA 6600, it is recommended to make a backup file of the configuration to avoid if you make a mistake so you can restore the configuration from the backup file.

To make backup file of configuration/setting of Dell Sonicwall NSA 6600 :
• Login to your Sonicwall. (you can use read only user for do this job)
• Go to System menu
• Choose Settings
• Choose Export Settings

How to know detail system information of Windows computer

If you want to know detail about hardware, software, BIOS version, Processor, and all system information of your Windows computer, you can get the information with very simple way.

Go to RUN command ( press Windows+R )
Write:  msinfo32  then press Enter key or click OK

Write:  msinfo32  to go to System information

The window of System information will appear

Detail System Information in Windows

How to find Driver for Unknown device in Windows

When you re-format or re-install Windows Operating System for your laptop or your Desktop Computer, sometime not all of device will get the right driver, sometime you will see Unknown Device status on Device manager. If you don't know which hardware that mark as unknown device, you can find it using the search engine (Google, Bing, Yahoo), but before you can be able to search the driver you need the information of the device, you need the value of hardware Ids.

• Open Device Manager (Using Run Command : Press Windows+R, then write devmgmt.msc click OK or press Enter key)
• Right click on the Unknown Device that you want to know for the driver
• Choose Properties