Skip to main content

Enabling HyperTerminal on Windows 11

Hyper Terminal on Windows 11

Using HyperTerminal on Windows 11: A Solution for Data Communication Needs

HyperTerminal is a useful application for data communication via serial COM port or TCP/IP Winsock. However, this application is no longer available on the latest Windows versions, including Windows 11. Many of us still need it to configure hardware devices such as switches, hubs, routers, NAS, and others.


The Problem and Solution

Many hardware devices still use configuration via serial COM port, despite significant advancements in technology. 

If you still need HyperTerminal on Windows 11, you don't have to downgrade to Windows XP. I have prepared the HyperTerminal files taken from Windows XP, namely hypertrm.exe and hypertrm.dll. I have tested it on Windows 11, and the application runs smoothly.


How to Use HyperTerminal on Windows 11

Here are the steps to use HyperTerminal on Windows 11:

1. Download HyperTerminal File: Download the hyperterminal.zip file from my drive.

2. Extract the File: Extract the zip file to a folder on your computer.

3. Run HyperTerminal: Click the hypertrm.exe file to run the HyperTerminal application.

4. Start Using: The HyperTerminal screen will appear, and you can start using it for your data communication needs.


By following these steps, you can use HyperTerminal on Windows 11 without downgrading to Windows XP. I hope this information is helpful to you!

Labels:

Comments

Post a Comment

Popular posts from this blog

How to Enable Hyper Terminal In Windows 7

Hyperterminal Windows 7. Windows 7 Hyperterminal. Hyper terminal is used for data communication via serial port com or TCP/IP Winsock. Unfortunately on Windows 7, Windows 8 and Windows 10 we can't see anymore, even though many of us who still need it, and it is not the solution if we have to go back to Windows XP. The solution :
Read more

Vaio stuck on loading screen after upgrading to Windows 10

My Sony Vaio laptop model : VPCCA16FB with originally using Windows 7 operating system, then now I already upgraded it to Windows 10. All drivers are already installed for each device, everything is OK with this Windows 10 OS. The only problem is:  when I switch the laptop on or restarting it, after vaio logo appears then it stuck with blank screen and it takes about 2 minutes. After that, then it continues to loading Windows. After I googling about the problem, I am not only the one, other people also have the similar problem with their laptops. The cause is in the Ultra Low Power State (ULPS) system. ULPS is a feature or mode in hardware (graphics card) designed to save power by reducing energy consumption to very low levels. Now the problem is solved. If you have the same or similar problem, maybe this below step will help you too.
Post a Comment
Read more

How to deny access to a drive in Windows 10

How to disable access to drives in Windows.  One of ways to  make disable access to drives in Windows (all Windows, Windows 10, Windows 8, Windows 7, also Windows server.. ), you can use Group policy editor . Below are  the steps: 1. Press Windows + R  (to open Run command ), write gpedit.msc at Run column, then hit Enter or click OK.
Read more